How you can sew on badges manually or by machine

If you want to brighten up a garment, accessory, luggage piece or even hats you could sew on badges to get the fresh look easily Www.trainingcollar.com
. Badges or patches when placed strategically can immediately alter the look of a garment or accessory and take it from boring to spunky within just a few minutes. In case you have children and they keep earning badges of merit you wish to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy when you know how you can do it.

To begin this approach to sewing on a badge, start with placing the badge in the place where you desire it. Now secure the badge well with pins to ensure that it stays in place and doesn't shift while you're sewing it on. So if you're putting the patch on a garment, you have to fix the patch and then try the garment on to ensure that the patch or the badge looks suitable in the place. In case your patch needs a little readjustment you can do it at this stage easily.

Now thread the needle being sure that the thread that you are using isn't too long. Maintain the thread on a length of approximately 18inches for easy maneuvering. If the thread is simply too long then you might get bothered by knots. Once you have the thread ready create a knot at the end of the thread. You can actually thread a needle yourself by holding the non knotted end between your forefinger and thumb and then passing it through the eye of the needle. You may also take the help of a needle threader if you find threading a needle this way difficult.

Pass the needle through the badge and also the fabric making sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you started stitching keeping this distance from your last stitch constantly. Continue stitching round the entire perimeter of the badge till you have completely finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread through a single stitch. Pull the thread strongly to secure the knot and after that cut-off any excess thread which is left. Lastly remove extra safety pins that you were using to secure the patch in position.

It's also possible to sew on badges with the aid of a sewing machine in case you don't want to do the same yourself. Select a thread that matched the color of your patch after which you can tread your machine. You could also select a contrasting color depending on the look which you want to give your badge. Once this is accomplished you need to start sewing you badge. Take advantage of the surface of the badge for your kick off point and sew all across the edge of your badge making use of the regular stitch mode ending in your starting point. Once done, cut the excess thread that connects the badge to the machine and your garment is ready for use with the badge.